NSN 5306-01-053-8934
Close Tolerance Hex Head Bolt
Between 0.749 inches and 0.779 inches fastener length, undercut hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4-6 for national stock number 5306010538934.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-053-8934.
-
MPN or Model
BACB30NF4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 0.749 inches and 0.779 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-199-0582 MPN 65-11033-2Aircraft Structural Component Support
- 1560-01-447-9918 MPN 65-8883-2Flying Boom Guard
- 1560-01-033-9238 MPN 69-3328Seal Assembly
- 5306-01-502-8750 MPN 9-66304-2U Bolt
- 5940-00-082-4665 MPN BACT42C22A-1Terminal Board
- 1560-00-304-1905 MPN 9-24847-2Nacelle Hinge Latch Assembly
- 1560-00-335-6814 MPN 60-1474-3000Control Rod Assembly
- 1560-00-335-8311 MPN 90-1565Dust Seal Ring Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-053-8934 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4-6 | Boeing Company, The |
BACB30NF4-6 | Boeing Defence Australia Ltd |
BACB30NF4-6 | Boeing Defence Australia Ltd |
BACB30NF4-6 | The Boeing Company |