NSN 5306-01-057-3042
Coaxial Connector
Between 1.339 inches and 1.369 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297-05012 for national stock number 5306010573042.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-3042.
-
MPN or Model
MS21297-05012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.579 inches and 0.629 inches -
Fastener Length
Between 1.339 inches and 1.369 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-184-3777 MPN BACB30LU8-21YShoulder Screw
- 5305-01-207-9339 MPN BACS12CK3U10Machine Screw
- 5305-01-462-2724 MPN 3M1169V3-10AClose Tolerance Screw
- 5305-01-466-0001 MPN VCL009-4-9Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170C3-5AFClose Tolerance Screw
- 5306-01-044-2977 MPN VAL23607-4-19Shoulder Bolt
- 5306-01-049-2991 MPN BACB30NE3-33Shear Bolt
- 5306-01-050-6477 MPN C4356CR5-0350Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-3042 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-05012 | Military Standards |
MS21297-05012 | Sps Technologies, Llc |
MS21297-05012 | Sps Technologies, Llc |
VFK101G5-012 | Valley-todeco, Inc. |
MS21297-05012 | Huck International, Inc. |
MS21297-05012 | Huck Intl Inc |
MS21297-05012 | Montgomery Bros Inc |