NSN 5305-01-209-7198
High Torque Screw
Between 1.455 inches and 1.485 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number BACB30LH3U18 for national stock number 5305012097198.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-209-7198.
-
MPN or Model
BACB30LH3U18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 1.455 inches and 1.485 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5135 MPN ST3M455-4L12-1Close Tolerance Screw
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
- 5305-01-347-3051 MPN VT10021B5-6Close Tolerance Screw
- 5305-01-496-5238 MPN 3M1169V4-17AClose Tolerance Screw
- 5306-00-356-1707 MPN VAL23029-3-6Close Tolerance Bolt
- 5306-00-762-2904 MPN VFK100G-06024Shear Bolt
- 5306-01-051-6035 MPN C4356N4D1400Shoulder Bolt
- 5306-01-142-3552 MPN VAL23608-4-48Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-209-7198 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3U18 | The Boeing Company |
BACB30LH3U18 | Huck International, Inc. |
BACB30LH3U18 | Sps Technologies, Llc |
BACB30LH3U18 | Valley-todeco, Inc. |
BACB30LH3U18 | Sps Technologies, Llc |
BACB30LH3U18 | Arconic Global Fasteners & Rings, |
BACB30LH3U18 | Federal Manufacturing Corporation |
BACB30LH3U18 | Sps Technologies, Llc |
BACB30LH3U18 | Sps Technologies, Llc |
BACB30LH3U18 | Huck Intl Inc |
BACB30LH3U18 | Alcoa Global Fasteners, Inc. |