NSN 5306-01-057-7209
Coaxial Connector
Between 4.098 inches and 4.128 inches fastener length, spline extended washer head style, between 0.554 inches and 0.594 inches head height, extended washer diameter: between 1.615 inches and 1.625 inches .
Manufacturer part number MS21297-14044 for national stock number 5306010577209.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-7209.
-
MPN or Model
MS21297-14044
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.338 inches and 1.388 inches -
Fastener Length
Between 4.098 inches and 4.128 inches -
Head Style
Spline extended washer -
Head Height
Between 0.554 inches and 0.594 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
Between 0.116 inches and 0.136 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Head Minor Diameter
Between 1.034 inches and 1.042 inches -
Grip Length
Between 2.740 inches and 2.760 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-915-4969 MPN AIC1023H10-12Machine Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-136-5740 MPN NAS1102-06-30Machine Screw
- 5305-01-211-6051 MPN AIC4038-04-7Machine Screw
- 5305-01-412-5361 MPN LD111-0044-0812Close Tolerance Screw
- 5305-01-418-2002 MPN AIC4463-08-6Machine Screw
- 5305-01-462-2744 MPN TX1026V5-15AClose Tolerance Screw
- 5305-01-477-5815 MPN 3M1170V5-6AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-7209 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-14044 | Military Standards |
MS21297-14044 | Sps Technologies, Llc |
MS21297-14044 | Sps Technologies, Llc |
MS21297-14044 | Huck International, Inc. |
MS21297-14044 | Huck Intl Inc |