NSN 5306-01-057-8129
Coaxial Connector
Between 3.298 inches and 3.328 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21297-12034 for national stock number 5306010578129.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-8129.
-
MPN or Model
MS21297-12034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.163 inches and 1.213 inches -
Fastener Length
Between 3.298 inches and 3.328 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5135 MPN ST3M455-4L12-1Close Tolerance Screw
- 5305-00-505-3017 MPN LS15265V3-15Close Tolerance Screw
- 5305-01-196-5093 MPN LD111-0044-2515Close Tolerance Screw
- 5305-01-435-0093 MPN BACB30LU14-11XClose Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5305-01-497-0829 MPN 3M1170C4-2AClose Tolerance Screw
- 5306-00-151-6179 MPN VAL23611-5DS028Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-8129 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-12034 | Huck International, Inc. |
MS21297-12034 | Sps Technologies, Llc |
MS21297-12034 | Sps Technologies, Llc |
VFK101G12-034 | Valley-todeco, Inc. |
MS212197-12034 | National Aerospace Standards |
MS21297-12034 | Military Standards |
MS21297-12034 | Huck Intl Inc |