NSN 5306-01-057-9313
Coaxial Connector
Between 2.201 inches and 2.231 inches fastener length, spline extended washer head style, between 0.383 inches and 0.403 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number MS21297-07023 for national stock number 5306010579313.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-9313.
-
MPN or Model
MS21297-07023
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.753 inches and 0.803 inches -
Fastener Length
Between 2.201 inches and 2.231 inches -
Head Style
Spline extended washer -
Head Height
Between 0.383 inches and 0.403 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Head Minor Diameter
Between 0.485 inches and 0.500 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-146-7289 MPN LS9362-1153-3Close Tolerance Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-235-2025 MPN 3M925C5-13AClose Tolerance Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-9313 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-07023 | Military Standards |
MS21297-07023 | Sps Technologies, Llc |
MS21297-07023 | Sps Technologies, Llc |
VFK101G7-023 | Valley-todeco, Inc. |
MS21297-07023 | Huck International, Inc. |