NSN 5306-01-058-0737
Coaxial Connector
Between 2.263 inches and 2.293 inches fastener length, spline extended washer head style, between 0.310 inches and 0.350 inches head height, width between flats: between 0.514 inches and 0.521 inches .
Manufacturer part number MS21297-07024 for national stock number 5306010580737.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-0737.
-
MPN or Model
MS21297-07024
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.753 inches and 0.803 inches -
Fastener Length
Between 2.263 inches and 2.293 inches -
Head Style
Spline extended washer -
Head Height
Between 0.310 inches and 0.350 inches -
Width Between Flats
Between 0.514 inches and 0.521 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-2005 MPN ST3M652C3-7AClose Tolerance Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-204-4201 MPN 3M926-5L19Close Tolerance Screw
- 5305-01-406-3080 MPN 3M925C3-4AClose Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5306-00-332-4467 MPN VAL23033-4-12Close Tolerance Bolt
- 5306-01-044-2974 MPN VAL23607-5-6Shoulder Bolt
- 5306-01-052-7201 MPN VAL23029-5-12Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-0737 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-07024 | Sps Technologies, Llc |
MS21297-07024 | Sps Technologies, Llc |
VFK101G7-024 | Valley-todeco, Inc. |
MS21297-07024 | National Aerospace Standards |
MS21297-07024 | Huck International, Inc. |
MS21297-07024 | Military Standards |
MS21297-07024 | Huck Intl Inc |