NSN 5306-01-058-0738
Coaxial Connector
Between 1.464 inches and 1.494 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297-05014 for national stock number 5306010580738.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-0738.
-
MPN or Model
MS21297-05014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.579 inches and 0.629 inches -
Fastener Length
Between 1.464 inches and 1.494 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
- 5306-00-079-6419 MPN VCD0020-4-6AShear Bolt
- 5306-00-528-6636 MPN J643P23AMachine Bolt
- 5306-00-900-5282 MPN VFK100G-05066Shear Bolt
- 5306-01-045-6584 MPN VAL23607-3-31Shoulder Bolt
- 5306-01-114-7958 MPN VAL22034-5G21Shear Bolt
- 5306-01-188-6840 MPN VAL23033-6D24Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-0738 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-05014 | Huck International, Inc. |
MS21297-050514 | Sps Technologies, Llc |
MS21297-05014 | Sps Technologies, Llc |
VFK101G7-020 | Valley-todeco, Inc. |
VFK101G5-014 | Valley-todeco, Inc. |
MS21297-05014 | National Aerospace Standards |
MS21297-05014 | Military Standards |
MS21297-05014 | Huck Intl Inc |