NSN 5306-01-058-3897
Coaxial Connector
Between 2.097 inches and 2.127 inches fastener length, spline extended washer head style, between 0.327 inches and 0.347 inches head height, extended washer diameter: between 0.691 inches and 0.701 inches .
Manufacturer part number MS21297-06023 for national stock number 5306010583897.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-3897.
-
MPN or Model
MS21297-06023
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.649 inches and 0.699 inches -
Fastener Length
Between 2.097 inches and 2.127 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-284-8380 MPN VT10021-5-26Close Tolerance Screw
- 5305-01-495-9257 MPN 3M1170C3-3AClose Tolerance Screw
- 5305-01-512-8308 MPN 3M1170C4-7AFClose Tolerance Screw
- 5305-01-514-3357 MPN ST3M557-4-11Close Tolerance Screw
- 5305-01-600-3736 MPN 3M1277E6D9ASocket Head Cap Screw
- 5306-00-409-3290 MPN BACB30LJ6DU20Close Tolerance Bolt
- 5306-00-493-4808 MPN VAL3602-5D016Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-3897 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-06023 | Military Standards |
MS21297-06023 | Sps Technologies, Llc |
MS21297-06023 | Sps Technologies, Llc |
VFK101G6-023 | Valley-todeco, Inc. |
MS21297-06023 | Huck International, Inc. |
MS21297-06023 | Huck Intl Inc |
MS21297-06023 | National Aerospace Standards |