NSN 5305-01-618-7165
High Torque Screw
1.363 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number VT10021-3-16 for national stock number 5305016187165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-618-7165.
-
MPN or Model
VT10021-3-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
1.363 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F16 -
Thread Diameter
0.190 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degrees reduced hd offset cruciform 132 ksi min shr -
Material
Steel comp h11 -
Material Specification
Ams 6487 national std/spec single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-536-7092 MPN ST3M454-4L9Close Tolerance Screw
- 5305-01-055-1146 MPN BACB30LU6-11Close Tolerance Screw
- 5305-01-055-3810 MPN BACB30LR4-28Close Tolerance Screw
- 5305-01-412-7539 MPN VCL0009-4-21Close Tolerance Screw
- 5305-01-413-2663 MPN VCL0009-8-37Close Tolerance Screw
- 5305-01-413-8477 MPN VCL0009-7-30Close Tolerance Screw
- 5305-01-591-0195 MPN ST3M557-7-12MClose Tolerance Screw
- 5306-00-321-9194 MPN VAL23029-4-9Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-618-7165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT10021-3-16 | Valley-todeco, Inc. |
AIC618-3-16 | Sps Technologies, Llc |
SF116-3-16 | Saturn Fasteners Inc |
GS1009-3-16 | B & B Specialties Inc. |
93926-3-16 | Sps Technologies, Llc |
93926-3-16 | Sps Technologies, Llc |
C20645-3-16 | Lockheed Martin Corporation |