NSN 5306-01-058-8399
Coaxial Connector
1.668 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number 160D891511-7 for national stock number 5306010588399.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-8399.
-
MPN or Model
160D891511-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.362 inches -
Fastener Length
1.668 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.140 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
1.590 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.840 inches first hole -
Material
Steel -
Material Specification
Ams 6411 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-091-0421 MPN A51V20521-11Boresight Handle
- 5985-00-163-4610 MPN 123SCAV5483-1Waveguide Assembly
- 1680-00-182-5123 MPN 30F88046-1Jett S Rod Assembly
- 5935-00-356-8016 MPN GA800RG18-40Electrical Connector Backshell
- 1680-00-413-2498 MPN 128AB10594-1Stowage Box
- 1560-00-416-9162 MPN 1128W44072-2Special Cover Assy
- 5940-00-429-7291 MPN E40-674Lug Terminal
- 1560-00-482-2863 MPN 1128WM43056-11Wing Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-8399 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D891511-7 | Northrop Grumman Systems Corporation |
160D891511-7 | Northrop Grumman Systems Corporation |