NSN 5305-00-032-3956
High Torque Screw
Between 1.000 inches and 1.047 inches fastener length, flat countersunk head style, between 0.555 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT239PB6-10 for national stock number 5305000323956.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-032-3956.
-
MPN or Model
HT239PB6-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
Between 1.000 inches and 1.047 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.555 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.00 degrees -
Surface Finish
63.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4130 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-8503 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
26512-gb510l manufacturers standard
More from these suppliers
- 5305-00-281-8118 MPN HT8140-4-7Close Tolerance Screw
- 5305-01-188-7592 MPN SC1786RE4-8Close Tolerance Screw
- 5305-01-218-1450 MPN HT4060V5-3ASShoulder Screw
- 5305-01-283-4635 MPN BACB30LU3-3Close Tolerance Screw
- 5305-01-329-9965 MPN SC2000B1032-12Machine Screw
- 5305-01-347-2023 MPN CHT4067-4-7Close Tolerance Screw
- 5305-01-580-7269 MPN CHT4068-8-7Close Tolerance Screw
- 5305-01-624-6016 MPN BACB30LU6D12YClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-032-3956 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB6-10 | Hi-shear Corporation |
106750-6-10 | Sps Technologies, Llc |
HT239PB6-10 | Lisi Aerospace Canada Corp |
HT8043-6-10 | Arconic Global Fasteners & Rings, |
GB510L6-10 | Huck International, Inc. |
HT8043-6-10 | Alcoa Global Fasteners, Inc. |
GB510L6-10 | Alcoa Global Fasteners, Inc. |
GB510L6-10 | Northrop Grumman Systems Corporation |
HT239PB6-10 | Hi-shear Corporation |
106750-6-10 | Sps Technologies, Llc |
GB510L6-10 | Northrop Grumman Systems Corporation |
HT8043-6-10 | Alcoa Global Fasteners, Inc. |