NSN 5306-01-060-6504
Coaxial Connector
Between 4.904 inches and 4.924 inches fastener length, spline drive shear head head style, 0.400 inches head height, grip diameter: between 0.7480 inches and 0.7490 inches .
Manufacturer part number PBF7521-12-65 for national stock number 5306010606504.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-060-6504.
-
MPN or Model
PBF7521-12-65
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.852 inches -
Fastener Length
Between 4.904 inches and 4.924 inches -
Head Style
Spline drive shear head -
Head Height
0.400 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
1.270 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 4.052 inches and 4.072 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-047-9441 MPN BACB30LU4-7Close Tolerance Screw
- 5305-01-462-2667 MPN 3M1034C6-13-51Close Tolerance Screw
- 5305-01-462-2887 MPN TX1027C3-8AClose Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5305-01-600-9473 MPN PMT1153-6Close Tolerance Screw
- 5306-00-958-8618 MPN VFK100G-07022Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-060-6504 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-12-65 | Sps Technologies, Llc |
VCG0009-12=65 | Valley-todeco, Inc. |
H411-12-65 | Huck International, Inc. |
120978-12-65 | Sps Technologies, Llc |
120978-12-65 | Sps Technologies, Llc |
AIC596-12-65 | Sps Technologies, Llc |
VS3133-12-65 | Alcoa Global Fasteners, Inc. |
C7521-12-65 | M.s. Aerospace Inc. |
C7521-12-65 | Acufast Aircraft Products Inc. |
C7521-12-65 | Alcoa Global Fasteners, Inc. |
C7521-12-65 | Lockheed Martin Corporation |