NSN 5306-01-063-1001
Coaxial Connector
Between 3.785 inches and 3.805 inches fastener length, double hexagon w/hole head style, between 1.041 inches and 1.061 inches head height, width between flats: between 1.240 inches and 1.260 inches .
Manufacturer part number MS21250-18034 for national stock number 5306010631001.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-063-1001.
-
MPN or Model
MS21250-18034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.650 inches and 1.690 inches -
Fastener Length
Between 3.785 inches and 3.805 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 1.041 inches and 1.061 inches -
Width Between Flats
Between 1.240 inches and 1.260 inches -
Extended Washer Diameter
Between 1.865 inches and 1.875 inches -
Extended Washer Thickness
Between 0.248 inches and 0.268 inches -
Grip Diameter
Between 1.1225 inches and 1.1240 inches -
End Application
Spec item -
Thread Diameter
1.125 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjef
More from these suppliers
- 5305-00-508-3071 MPN LS15265V5-11Close Tolerance Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-912-4816 MPN NAS1101C3H4Machine Screw
- 5305-00-913-7854 MPN NAS1101-3H6Machine Screw
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-335-6017 MPN PB1166-3D8Machine Screw
- 5305-01-381-0914 MPN PBF1198-6-31Close Tolerance Screw
- 5305-01-381-5754 MPN PBF1417-5-39Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-063-1001 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-18034 | Military Standards |
MS21250-18034 | Sps Technologies, Llc |
MS21250-18034 | Sps Technologies, Llc |
MS21250-18034 | Military Standards |