NSN 5306-01-072-9122
Shouldered Rivet Ring Bolt
About this product
Between 0.436 inches and 0.441 inches eye inside diameter, 0.125 inches shoulder thickness, between 2.828 inches and 2.875 inches shank length, eye stock thickness: between 0.308 inches and 0.318 inches .
Manufacturer part number AN48-C26A for national stock number 5306010729122.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-072-9122.
-
MPN or Model
AN48-C26A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.766 inches and 0.813 inches -
Eye Inside Diameter
Between 0.436 inches and 0.441 inches -
Shoulder Thickness
0.125 inches -
Shank Length
Between 2.828 inches and 2.875 inches -
Eye Stock Thickness
Between 0.308 inches and 0.318 inches -
Shoulder Diameter
1.000 inches -
Overall Length
4.218 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
3.656 inches -
Eye Outside Width
1.000 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-455-2464 MPN NAS1063A10-105BNTerminal Board Marker Strip
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-008-5883 MPN NAS1101C06-20Machine Screw
- 5305-00-008-5884 MPN NAS1101C08-9Machine Screw
- 5305-00-058-2575 MPN NAS1623-4Machine Screw
- 5305-00-059-3657 MPN NASM51958-61Machine Screw
- 5305-00-099-7659 MPN NAS1221-08E3Machine Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-072-9122 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN48-C26A | National Aerospace Standards |
AN48-C26A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.