NSN 5305-00-059-4579
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, pan head style, between 0.331 inches and 0.373 inches head diameter, head height: between 0.123 inches and 0.133 inches .
Manufacturer part number LS15234-3-6 for national stock number 5305000594579.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-059-4579.
-
MPN or Model
LS15234-3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Pan -
Head Diameter
Between 0.331 inches and 0.373 inches -
Head Height
Between 0.123 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1133 professional/industrial association standard
More from these suppliers
- 5940-01-425-6527 MPN NAS1063A20-456Terminal Board Marker Strip
- 5940-01-615-1039 MPN NAS1063Terminal Board Marker Strip
- 5940-01-391-5970 MPN NAS1063A9-TB141CTerminal Board Marker Strip
- 5305-00-005-5927 MPN NAS1131-12Close Tolerance Screw
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-025-4006 MPN NAS1189E08P12NKSocket Head Cap Screw
- 5305-00-052-9049 MPN MS24630-34Tapping Screw
- 5305-00-057-0521 MPN MS51958-25Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-059-4579 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15234-3-6 | Lockheed Martin Corporation |
NAS1133-6 | National Aerospace Standards |
10124934 | Nimikkeistokeskus Ncb Finland |