NSN 5306-01-073-6611
Close Tolerance Hex Head Bolt
Between 4.034 inches and 4.064 inches fastener length, double hexagon head style, 0.469 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number 5169279-001 for national stock number 5306010736611.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-073-6611.
-
MPN or Model
5169279-001
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.049 inches -
Fastener Length
Between 4.034 inches and 4.064 inches -
Head Style
Double hexagon -
Head Height
0.469 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
End Application
Harpoon launcher; ticonderoga class cg (47); spruance class dd (963); kidd class ddg; fms - build frigates class ships -
Thread Diameter
0.875 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
113000 pounds per square inch -
Material
Cobalt comp mp-35-n -
Material Specification
Asm 5844 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-192-3882 MPN 2696242-0423Film Fixed Resistor
- 4820-00-288-7836 MPN 571-4900-1302763REVAPCV21Safety Relief Valve
- 4820-00-369-3860 MPN 5901-1297977ITEM10Flow Control Valve
- 4820-00-428-3096 MPN 575-4810-1443329REVAPC3Globe Valve
- 4820-00-506-2677 MPN 572-2100-1417456REVCPC33ACheck Valve
- 5905-00-607-8672 MPN 1820882-1Film Fixed Resistor
- 5985-00-735-4741 MPN 2135833REVFVariable Attenuator
- 5905-00-810-2112 MPN 5519587Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-073-6611 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5169279-001 | Naval Sea Systems Command |
77720-14-48 | Sps Technologies, Llc |