NSN 5306-01-079-1360
Coaxial Connector
Between 1.449 inches and 1.479 inches fastener length, double hexagon w/hole head style, between 0.338 inches and 0.358 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 121887-5-14 for national stock number 5306010791360.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-079-1360.
-
MPN or Model
121887-5-14
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.564 inches and 0.614 inches -
Fastener Length
Between 1.449 inches and 1.479 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.338 inches and 0.358 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
Between 0.072 inches and 0.092 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material Specification
Ams 5862 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-082-1941 MPN 3MFR1504-6Machine Screw
- 5305-00-086-2456 MPN NAS1203-26Close Tolerance Screw
- 5305-00-159-5554 MPN NAS1101E08-8Machine Screw
- 5305-00-505-3039 MPN LS15265V3-19Close Tolerance Screw
- 5305-00-899-1934 MPN 66117H8-15Machine Screw
- 5305-00-959-1909 MPN 94708-3F-10Socket Head Cap Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-046-5460 MPN HT4009-4-22Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-079-1360 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121887-5-14 | Sps Technologies, Llc |
121887-5-14 | Sps Technologies, Llc |
121887-5-14 | Sps Technologies, Llc |
121887-5-14 | Sps Technologies, Llc |