NSN 5306-01-093-1561
Close Tolerance Hex Head Bolt
Between 0.805 inches and 0.825 inches fastener length, hexagon head style, between 0.127 inches and 0.139 inches head height, width between flats: between 0.305 inches and 0.313 inches .
Manufacturer part number J712P019A for national stock number 5306010931561.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-093-1561.
-
MPN or Model
J712P019A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.394 inches and 0.424 inches -
Fastener Length
Between 0.805 inches and 0.825 inches -
Head Style
Hexagon -
Head Height
Between 0.127 inches and 0.139 inches -
Width Between Flats
Between 0.305 inches and 0.313 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Thread Diameter
0.164 inches -
Grip Length
Between 0.401 inches and 0.411 inches -
Thready Qty Per Inch (tpi)
36 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-174-8621 MPN HT8039-4-8Close Tolerance Screw
- 5305-00-505-4217 MPN LS9682V8Machine Screw
- 5305-00-764-3036 MPN HT403A6-14Machine Screw
- 5305-00-809-3053 MPN 51B221-15HMachine Screw
- 5305-01-054-4634 MPN BACB30LU4-16Close Tolerance Screw
- 5305-01-054-6234 MPN VT1696-6-15Close Tolerance Screw
- 5305-01-143-0611 MPN HT4020-5-20AXShoulder Screw
- 5305-01-158-5369 MPN SC2163-3-4Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-093-1561 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J712P019A | General Electric Company |
J712P019A | Arconic Global Fasteners & Rings, |
Stock Check
- NE: 1440
- NS: 246
- SV: 1