NSN 5306-01-093-4351
Close Tolerance Hex Head Bolt
Must have 12 point wrenching configuration.
Manufacturer part number 121933-4-22 for national stock number 5306010934351.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-093-4351.
-
MPN or Model
121933-4-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.358 inches -
Fastener Length
1.733 inches -
Head Style
Undercut hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.769 inches all holes -
Material
Stainless steel -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-8627 MPN 16991-98C-6Socket Head Cap Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-227-1265 MPN 55979-4-17Shoulder Screw
- 5305-00-345-1587 MPN LS15265V3-4Close Tolerance Screw
- 5305-00-347-7853 MPN LS15265V3-18Close Tolerance Screw
- 5305-00-720-9112 MPN NAS1204-4Close Tolerance Screw
- 5305-00-890-0102 MPN NAS1203-22Close Tolerance Screw
- 5305-00-891-1723 MPN 66117H3-6Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-093-4351 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-4-22 | Sps Technologies, Llc |
121933-4-22 | Sps Technologies, Llc |