NSN 5305-00-152-0536
High Torque Screw
Between 1.835 inches and 1.882 inches fastener length, flat countersunk head style, 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number SFT22-5A24 for national stock number 5305001520536.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-152-0536.
-
MPN or Model
SFT22-5A24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.392 inches -
Fastener Length
Between 1.835 inches and 1.882 inches -
Head Style
Flat countersunk -
Head Diameter
0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-525-5016 MPN NAS5312E3-6JSix Lobe Recess Scr
- 5305-00-130-7645 MPN AIC1023H6-19Close Tolerance Screw
- 5305-01-076-4881 MPN NAS1101-06-10Machine Screw
- 5305-01-242-7415 MPN AIC485-52Externally Relieved Body Screw
- 5305-01-310-9248 MPN AIC986-6-7Close Tolerance Screw
- 5305-01-349-4191 MPN AIC1652-3-2Close Tolerance Screw
- 5305-01-417-2495 MPN TX1027D4-20Close Tolerance Screw
- 5305-01-626-2869 MPN BACS12HJ3K7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-152-0536 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT22-5A24 | Sps Technologies, Llc |
SFH22-5A24 | Sps Technologies, Llc |
AIC82-5-24 | Sps Technologies, Llc |
VS2545T5F24 | Alcoa Global Fasteners, Inc. |
SFT22-5A24 | Sps Technologies, Llc |
C082-5-24 | Lockheed Martin Corporation |
SFT22-5A24 | Sps Technologies, Llc |
SFH22-5A24 | Sps Technologies, Llc |
AIC82-5-24 | Sps Technologies, Llc |
VS2545T5F24 | Alcoa Global Fasteners, Inc. |
C082-5-24 | Lockheed Martin Corporation |
SFT22-5A24 | Sps Technologies, Llc |