NSN 5306-01-108-7458
Coaxial Connector
Between 2.166 inches and 2.196 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21134-05026 for national stock number 5306011087458.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-108-7458.
-
MPN or Model
MS21134-05026
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.531 inches and 0.581 inches -
Fastener Length
Between 2.166 inches and 2.196 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-182-7307 MPN CVC241A5-14Machine Screw
- 5305-00-478-0848 MPN AIC1351-114Socket Head Cap Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-00-916-4610 MPN AIC1023H5-23Machine Screw
- 5305-00-971-7499 MPN AIC82-3-4Machine Screw
- 5305-01-066-9358 MPN 51B333-25HClose Tolerance Screw
- 5305-01-107-3547 MPN AIC812-00-8Machine Screw
- 5305-01-207-7517 MPN BACS12CK3-35Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-108-7458 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-05026 | Huck International, Inc. |
MS21134-05026 | Sps Technologies, Llc |
MS21134-05026 | Sps Technologies, Llc |
MS21134-05026 | Alcoa Global Fasteners, Inc. |
MS21134-05026 | Sps Technologies, Llc |
MS21134-05026 | National Aerospace Standards |
MS21134-05026 | Sps Technologies, Llc |
MS21134-05026 | Military Standards |
MS21134-05026 | Huck Intl Inc |
Stock Check
- NE: 1050
- NS: 538