NSN 5306-01-109-0741
Coaxial Connector
Between 3.180 inches and 3.200 inches fastener length, double hexagon w/hole head style, between 1.256 inches and 1.276 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number LWB22D12-22 for national stock number 5306011090741.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-109-0741.
-
MPN or Model
LWB22D12-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.805 inches and 1.825 inches -
Fastener Length
Between 3.180 inches and 3.200 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 1.256 inches and 1.276 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Extended Washer Diameter
Between 2.303 inches and 2.313 inches -
Extended Washer Thickness
Between 0.264 inches and 0.284 inches -
Grip Diameter
Between 1.3725 inches and 1.3740 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
1.375 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-513-6935 MPN ST3M557-3-9Close Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-00-224-9320 MPN VFK100G-09030Shear Bolt
- 5306-00-512-6422 MPN VEP220555-4-16Machine Bolt
- 5306-00-901-4299 MPN MS21250-07016Shear Bolt
- 5306-01-044-0737 MPN VAL22034-7FS18Shear Bolt
- 5306-01-141-7873 MPN VAL23608-3D13Shoulder Bolt
- 5306-01-198-8248 MPN BACB30LM4DH16Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-109-0741 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LWB22D12-22 | Sps Technologies, Llc |
BM331512-22 | Huck International, Inc. |
GB511W12-22 | Northrop Grumman Systems Corporation |
GB511GF12-22 | Sps Technologies, Llc |
GB511GF12-22 | Valley-todeco, Inc. |
GB511GF12-22 | Sps Technologies, Llc |
GB511GF12-22 | Sps Technologies, Llc |
GB511GF12-22 | Northrop Grumman Systems Corporation |
BM331512-22 | Huck Intl Inc |
LWB22D12-22 | Sps Technologies, Llc |