NSN 5305-01-347-9810
High Torque Screw
Between 1.329 inches and 1.359 inches fastener length, flat countersunk head style, between 0.577 inches and 0.695 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HR242-5-14P for national stock number 5305013479810.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-347-9810.
-
MPN or Model
HR242-5-14P
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.329 inches and 1.359 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.695 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-349-4192 MPN VCL0009-5-23Close Tolerance Screw
- 5305-01-386-2556 MPN VCL0009-3-9Machine Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-435-3015 MPN BACB30LU5-15Close Tolerance Screw
- 5305-01-462-2726 MPN 3M1169V4-12AClose Tolerance Screw
- 5305-01-521-9174 MPN ST3M557-5-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-347-9810 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR242-5-14P | Hi-shear Corporation |
HR242-5-14P | Lisi Aerospace Canada Corp |
X007-5-14P | Huck International, Inc. |
X007-5-14P | Huck Intl Inc |
VCL0008-5-14P | Valley-todeco, Inc. |
AIC4410-5-14P | Sps Technologies, Llc |
SLB217-5-14P | Space-lok, Inc. |
03A161-5-14P | Northrop Grumman Systems Corporation |
PBF1419-5-14P | Sps Technologies, Llc |
123471-5-14P | Sps Technologies, Llc |