NSN 5306-01-115-2511
Coaxial Connector
Between 1.263 inches and 1.310 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 642AS0416-5 for national stock number 5306011152511.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-115-2511.
-
MPN or Model
642AS0416-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.263 inches and 1.310 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Asm 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-5786 MPN BACB30LU8-29Close Tolerance Screw
- 5305-01-452-1676 MPN LD111-0045-2417Close Tolerance Screw
- 5306-00-074-2701 MPN VFK100G-05012Shear Bolt
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-00-286-0196 MPN VAL23033-4D12Shear Bolt
- 5306-00-782-8248 MPN BACB30GT7-33Shear Bolt
- 5306-01-010-2346 MPN GB511GF6-17Shear Bolt
- 5306-01-156-4390 MPN 9147M29P01Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-115-2511 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
642AS0416-5 | Naval Air Systems Command |
109453-5-13 | Sps Technologies, Llc |
VAL23029-5-13 | Valley-todeco, Inc. |
AIC437-5-13 | Sps Technologies, Llc |
MB61-5-13 | Hi-shear Corporation |
VS3204-5-13 | Arconic Global Fasteners & Rings, |
BM17019-5-13 | Huck International, Inc. |
MB61-5-13 | Lisi Aerospace Canada Corp |
BM17019-5-13 | Huck Intl Inc |
VS3204-5-13 | Alcoa Global Fasteners, Inc. |