NSN 5306-01-530-5274
Coaxial Connector
1.518 inches fastener length, double hexagon w/hole head style, between 0.345 inches and 0.365 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0021-0714 for national stock number 5306015305274.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-530-5274.
-
MPN or Model
LD111-0021-0714
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.708 inches and 0.758 inches -
Fastener Length
1.518 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.345 inches and 0.365 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
Between 0.089 inches and 0.109 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
End Application
B-1bacft -
Thread Diameter
0.438 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Bolt, tension -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-5755 MPN BACB30LU8-28Close Tolerance Screw
- 5306-00-097-4662 MPN VFK100G-05036Shear Bolt
- 5306-00-958-9202 MPN VFK100G-04018Shear Bolt
- 5306-01-044-2234 MPN VAL22034-6G20Shear Bolt
- 5306-01-046-0509 MPN ST3M507-4D29Shoulder Bolt
- 5306-01-055-3776 MPN BACB30MT16T49Shear Bolt
- 5306-01-058-8420 MPN VFK101G3-004Close Tolerance Bolt
- 5306-01-142-8371 MPN VAL23607-4-38Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-530-5274 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0714 | Boeing Company, The |
LD111-0021-0714 | Sps Technologies, Llc |
LD111-0021-0714 | Valley-todeco, Inc. |
LD111-0021-0714 | Huck International, Inc. |
LD111-0021-0714 | J.w. Manufacturing, Inc |
LD111-0021-0714 | Abounding Security Inc |
LD111-0021-0714 | Sps Technologies, Llc |
LD111-0021-0714 | Hi-shear Corporation |
LD111-0021-0714 | Sps Technologies, Llc |
LD111-0021-0714 | Alcoa Global Fasteners, Inc. |
Stock Check
- NS: 1
- NE: 9