NSN 5306-01-130-9474
Close Tolerance Hex Head Bolt
Between 1.708 inches and 1.755 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number VCG0002-7-18 for national stock number 5306011309474.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-130-9474.
-
MPN or Model
VCG0002-7-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.573 inches and 0.640 inches -
Fastener Length
Between 1.708 inches and 1.755 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Head Minor Diameter
Between 0.711 inches and 0.717 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-170-8489 MPN LD111-0044-2411Close Tolerance Screw
- 5305-01-309-7039 MPN 74A731255-2001Socket Head Cap Screw
- 5305-01-512-8353 MPN 3M1170C3-6AFClose Tolerance Screw
- 5306-00-040-9749 MPN VFK100G-06052Shear Bolt
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-00-735-8053 MPN 6824018-16Machine Bolt
- 5306-01-045-4199 MPN VAL23608-4-3Shoulder Bolt
- 5306-01-054-3426 MPN VCG0009L7-15Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-130-9474 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0002-7-18 | Valley-todeco, Inc. |
AIC688-7-18 | Sps Technologies, Llc |
PBF1266-7-18 | Sps Technologies, Llc |
MB155-7-18 | Hi-shear Corporation |
122896-7-18 | Sps Technologies, Llc |
S397-7-18 | Huck International, Inc. |
VS3191-7-18 | Arconic Global Fasteners & Rings, |
HP7747-7-18 | Heartland Precision Fasteners, Inc. |
ST3M747-7-18 | Fastener Innovation Technology, Inc. |
ST3M747-7-18 | Hi-shear Corporation |
ST3M747-7-18 | Lisi Aerospace Canada Corp |
MB155-7-18 | Lisi Aerospace Canada Corp |
VS3191-7-18 | Alcoa Global Fasteners, Inc. |
ST3M747-7-18 | Sps Technologies, Llc |
ST3M747-7-18 | Valley-todeco, Inc. |
ST3M747-7-18 | Sps Technologies, Llc |
ST3M747-7-18 | Sps Technologies, Llc |
ST3M747-7-18 | Alcoa Global Fasteners, Inc. |
ST3M747-7-18 | Boeing Company, The |
S397-7-18 | Huck Intl Inc |
GS1031-7-18 | B & B Specialties Inc. |
ST3M747-7-18 | Reid Products Inc. |