NSN 5306-01-131-8458
Coaxial Connector
Between 0.884 inches and 0.931 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number VAL22034-6F8 for national stock number 5306011318458.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-131-8458.
-
MPN or Model
VAL22034-6F8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 0.884 inches and 0.931 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2814 MPN LS15267V3-17Machine Screw
- 5305-01-178-9308 MPN ST3M557-3-5Close Tolerance Screw
- 5305-01-435-3897 MPN BACB30LU7-45Close Tolerance Screw
- 5305-01-505-4052 MPN TX1024C3-2-5AClose Tolerance Screw
- 5305-01-512-8274 MPN 3M1170C4-9AFClose Tolerance Screw
- 5306-00-443-6799 MPN STSBG002A04U018Shear Bolt
- 5306-01-054-1534 MPN BACB30LM3-7Shear Bolt
- 5306-01-141-7877 MPN VAL23608-4D5Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-131-8458 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL22034-6F8 | Valley-todeco, Inc. |
VAL22034-6G8 | Valley-todeco, Inc. |
AIC516B6-8 | Sps Technologies, Llc |
EWSB22D6-A8 | Sps Technologies, Llc |
BM17020-6-8A | Huck International, Inc. |
VS3071-6F8 | Arconic Global Fasteners & Rings, |
PBF107B6-8 | Sps Technologies, Llc |
GB511B6-8 | Northrop Grumman Systems Corporation |
VAL22034-6F8 | Valley-todeco, Inc. |
VAL22034-6G8 | Valley-todeco, Inc. |
AIC516B6-8 | Sps Technologies, Llc |
EWSB22D6-A8 | Sps Technologies, Llc |
GB511B6-8 | Northrop Grumman Systems Corporation |