NSN 5306-01-131-2927
Close Tolerance Hex Head Bolt
Furnished with retaining element,drilled holes ninety degees apart.
Manufacturer part number SS5115-4-30 for national stock number 5306011312927.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-131-2927.
-
MPN or Model
SS5115-4-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.309 inches and 0.360 inches -
Fastener Length
Between 2.320 inches and 2.340 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.875 inches and 1.891 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.235 inches all holes and 2.265 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-047-4012 MPN 67077-3-10Machine Screw
- 5305-00-074-4333 MPN NAS1203-32Close Tolerance Screw
- 5305-00-137-3045 MPN 94703L94C4Socket Head Cap Screw
- 5305-00-316-7487 MPN 106752-103CMachine Screw
- 5305-00-492-8744 MPN NAS1101-06-7BMachine Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-980-9563 MPN 16990N-98C-6BSocket Head Cap Screw
- 5305-01-014-4258 MPN 73991H-7D23Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-131-2927 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-4-30 | Sikorsky Aircraft Corporation |
SS5115-4-30 | Sps Technologies, Llc |