NSN 5306-01-131-6726
Coaxial Connector
Between 5.709 inches and 5.739 inches fastener length, spline extended washer head style, between 0.462 inches and 0.482 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number S343-10-77 for national stock number 5306011316726.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-131-6726.
-
MPN or Model
S343-10-77
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.887 inches and 0.937 inches -
Fastener Length
Between 5.709 inches and 5.739 inches -
Head Style
Spline extended washer -
Head Height
Between 0.462 inches and 0.482 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.774 inches and 0.782 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 4.802 inches and 4.822 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-435-5961 MPN BACB30LU7-53Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-508-3845 MPN 3M1169C6-10AClose Tolerance Screw
- 5305-01-513-8891 MPN VCL0010-6-12Close Tolerance Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-00-367-4388 MPN 68487-4-019Shear Bolt
- 5306-00-726-4454 MPN VFJK100G-06020Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-131-6726 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S343-10-77 | Huck International, Inc. |
VS3190-10-77 | Arconic Global Fasteners & Rings, |
AIC763-10-77 | Sps Technologies, Llc |
122897-10-77 | Sps Technologies, Llc |
ST3M753-10-77 | Boeing Company, The |
VFK600-10-77 | Valley-todeco, Inc. |
PBF1267-10-77 | Sps Technologies, Llc |
MB156-10-77 | Hi-shear Corporation |
11829-10-77 | Reid Products Inc. |
MB156-10-77 | Lisi Aerospace Canada Corp |
S343-10-77 | Huck Intl Inc |
VS3190-10-77 | Alcoa Global Fasteners, Inc. |