NSN 5306-01-132-1060
Close Tolerance Hex Head Bolt
Between 2.506 inches and 2.526 inches fastener length, spline drive shear head head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.578 inches and 0.585 inches .
Manufacturer part number VCG0001-6D34 for national stock number 5306011321060.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-132-1060.
-
MPN or Model
VCG0001-6D34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.411 inches -
Fastener Length
Between 2.506 inches and 2.526 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.578 inches and 0.585 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.388 inches first hole and 2.418 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-089-3144 MPN ST3M714-3-6Close Tolerance Screw
- 5305-01-447-6386 MPN 3M1170D3-10AClose Tolerance Screw
- 5305-01-501-4784 MPN 3M1170C3-26AClose Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5305-01-618-7142 MPN VT10021-3-14Close Tolerance Screw
- 5306-01-049-4698 MPN BACB30LE5-13Shear Bolt
- 5306-01-054-3404 MPN VCG0009L6-11Shear Bolt
- 5306-01-054-3419 MPN C7521L6-13Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-132-1060 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0001-6D34 | Valley-todeco, Inc. |
AIC687-6D34 | Sps Technologies, Llc |
PBF1265-6D34 | Sps Technologies, Llc |
MB154-6D34 | Hi-shear Corporation |
122895-6D34 | Sps Technologies, Llc |
VS3174-6D34 | Arconic Global Fasteners & Rings, |
S406-6D34 | Huck International, Inc. |
MB154-6D34 | Lisi Aerospace Canada Corp |
11823-6D34 | Reid Products Inc. |
ST3M744-6D34 | Boeing Company, The |
S406-6D34 | Huck Intl Inc |
VS3174-6D34 | Alcoa Global Fasteners, Inc. |
10115878 | Nimikkeistokeskus Ncb Finland |
ST3M744-6D34 | Fastener Innovation Technology, Inc. |
GS1015-6D34 | B & B Specialties Inc. |