NSN 5306-01-332-3180
Close Tolerance Hex Head Bolt
1.476 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BM3200-5A018 for national stock number 5306013323180.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-332-3180.
-
MPN or Model
BM3200-5A018
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.351 inches -
Fastener Length
1.476 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.125 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Material
Steel comp h11 -
Surface Treatment
Chromate and nickel and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-561-3675 MPN 3M927-5915Close Tolerance Screw
- 5306-00-765-2967 MPN VAL21013-12044Shear Bolt
- 5306-00-905-8448 MPN VFK100G-04004Shear Bolt
- 5306-00-912-6805 MPN MS21250-04010Shear Bolt
- 5306-01-046-2017 MPN VAL23033-4X17Shoulder Bolt
- 5306-01-078-5979 MPN VAL23033-5-22Close Tolerance Bolt
- 5306-01-183-6980 MPN LD111-0020-0408Shear Bolt
- 5306-01-349-4182 MPN VCC0090-7H22Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-332-3180 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM3200-5A018 | Huck International, Inc. |
VS2978A05U018 | Arconic Global Fasteners & Rings, |
VAL23611-5D018 | Valley-todeco, Inc. |
AIC2263A05U018 | Sps Technologies, Llc |
PBF1041A5U018 | Sps Technologies, Llc |
68484-5A018 | Sps Technologies, Llc |
STSBG000A05U018 | Lockheed Martin Corporation |
STSBG000A05U018 | Sonic Industries Inc. |
11797A05U018 | Reid Products Inc. |
BM3200-5A018 | Huck Intl Inc |
VS2978A05U018 | Alcoa Global Fasteners, Inc. |
Stock Check
- NS: 12
- NE: 5