NSN 5306-01-132-5609
Coaxial Connector
Between 0.745 inches and 0.775 inches fastener length, spline extended washer head style, between 0.194 inches and 0.234 inches head height, extended washer diameter: between 0.428 inches and 0.438 inches .
Manufacturer part number 3219-097 for national stock number 5306011325609.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-132-5609.
-
MPN or Model
3219-097
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.535 inches -
Fastener Length
Between 0.745 inches and 0.775 inches -
Head Style
Spline extended washer -
Head Height
Between 0.194 inches and 0.234 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Hole Diameter
Between 0.032 inches and 0.042 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.318 inches and 0.324 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Hole Configuration Style
Spline -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-312-6138 MPN 87730064Master Vertical Manifold
- 1680-01-547-7893 MPN 41009786Aircraft Drain Tube
- 5930-01-170-5280 MPN 746-000-1Isolation Switch
- 1560-01-481-2958 MPN 84002153-104Electrohydraulic Se
- 4920-01-370-4254 MPN 87501174-101Test Adapter
- 5905-00-138-7421 MPN 10120337Film Fixed Resistor
- 5945-00-234-0565 MPN 403-8802Electrical Relay
- 5905-00-237-2050 MPN 10120567Film Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-132-5609 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3219-097 | Woodward, Inc. |
10115890 | Nimikkeistokeskus Ncb Finland |
3219-097 | Woodward Hrt, Inc. |