NSN 5306-01-133-3870
Coaxial Connector
Between 2.294 inches and 2.341 inches fastener length, double hexagon head style, between 0.130 inches and 0.150 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number VCD0004-3-32F for national stock number 5306011333870.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-133-3870.
-
MPN or Model
VCD0004-3-32F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.284 inches and 0.351 inches -
Fastener Length
Between 2.294 inches and 2.341 inches -
Head Style
Double hexagon -
Head Height
Between 0.130 inches and 0.150 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-190-5779 MPN LD111-0044-2308Close Tolerance Screw
- 5305-01-462-2726 MPN 3M1169V4-12AClose Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5305-01-600-3733 MPN 3M1277E6D8ASocket Head Cap Screw
- 5305-01-600-8384 MPN PMT1153-2Close Tolerance Screw
- 5306-00-059-1205 MPN 3M33-3H2Close Tolerance Bolt
- 5306-00-321-9350 MPN VAL23029-7-10Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-133-3870 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCD0004-3-32F | Valley-todeco, Inc. |
AIC558-3-32 | Sps Technologies, Llc |
PBF1290-3-32 | Sps Technologies, Llc |
79894D3-A32 | Sps Technologies, Llc |
VS3244F-3-32 | Alcoa Global Fasteners, Inc. |
H408F3-32 | Huck International, Inc. |
GB511EB3-32 | Northrop Grumman Systems Corporation |
H408F3-32 | Huck Intl Inc |