NSN 5306-01-133-8616
Close Tolerance Hex Head Bolt
Between 1.118 inches and 1.138 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number S406-4D13 for national stock number 5306011338616.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-133-8616.
-
MPN or Model
S406-4D13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.336 inches -
Fastener Length
Between 1.118 inches and 1.138 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Head Minor Diameter
Between 0.389 inches and 0.448 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.000 inches first hole and 1.030 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-6017 MPN ST3M454-3L17Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-387-6048 MPN ST3M454-7L-26Close Tolerance Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-435-8675 MPN BACB30LU9-54Close Tolerance Screw
- 5306-00-492-6982 MPN STSBG003A04U024Shear Bolt
- 5306-00-723-3895 MPN VAL21013-12090Shear Bolt
- 5306-00-905-8449 MPN MS21250-05024Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-133-8616 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S406-4D13 | Huck International, Inc. |
ST3M744-4D13 | Boeing Company, The |
VCG0001-4D13 | Valley-todeco, Inc. |
AIC687-4D13 | Sps Technologies, Llc |
122895-4D13 | Sps Technologies, Llc |
PBF1265-4D13 | Sps Technologies, Llc |
MB154-4D13 | Hi-shear Corporation |
MB154-4D13 | Lisi Aerospace Canada Corp |
VS3174-4D13 | Alcoa Global Fasteners, Inc. |
ST3M744-4D13 | Arconic Global Fasteners & Rings, |
VS3174-4D13 | Arconic Global Fasteners & Rings, |
S406-4D13 | Huck Intl Inc |
10115921 | Nimikkeistokeskus Ncb Finland |
ST3M744-4D13 | Alcoa Global Fasteners, Inc. |
GS1015-4D13 | B & B Specialties Inc. |