NSN 5306-01-135-3513
Close Tolerance Hex Head Bolt
Between 0.738 inches and 0.785 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number S397-4-7 for national stock number 5306011353513.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-135-3513.
-
MPN or Model
S397-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 0.738 inches and 0.785 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.448 inches and 0.455 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-172-8200 MPN HS4727-3-26Close Tolerance Screw
- 5306-00-528-4945 MPN VAL23029-10D32Close Tolerance Bolt
- 5306-00-803-9406 MPN GB511H6-16Machine Bolt
- 5306-01-045-2428 MPN VAL23607-5D16Shoulder Bolt
- 5306-01-054-3427 MPN VCG0009L7-16Shear Bolt
- 5306-01-142-3545 MPN VAL23608-4D94Shoulder Bolt
- 5306-01-145-4561 MPN BACB30LJ3DU12Close Tolerance Bolt
- 5306-01-349-4183 MPN VCC0090-9-25Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-135-3513 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S397-4-7 | Huck International, Inc. |
VCG0002-4-7 | Valley-todeco, Inc. |
AIC688-4-7 | Sps Technologies, Llc |
PBF1266-4-7 | Sps Technologies, Llc |
122896-4-7 | Sps Technologies, Llc |
MB155-4-7 | Hi-shear Corporation |
ST3M747-4-7 | Boeing Company, The |
VS3191-4-7 | Arconic Global Fasteners & Rings, |
HP7747-4-7 | Heartland Precision Fasteners, Inc. |
11833-4-7 | Reid Products Inc. |
MB155-4-7 | Lisi Aerospace Canada Corp |
S397-4-7 | Huck Intl Inc |
10115936 | Nimikkeistokeskus Ncb Finland |
VS3191-4-7 | Alcoa Global Fasteners, Inc. |
GS1031-4-7 | B & B Specialties Inc. |