NSN 5306-01-136-7441
Close Tolerance Hex Head Bolt
Between 2.431 inches and 2.451 inches fastener length, spline drive shear head head style, 0.164 inches head height, width between flats: between 0.448 inches and 0.455 inches .
Manufacturer part number ST3M744-4D34 for national stock number 5306011367441.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-136-7441.
-
MPN or Model
ST3M744-4D34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.336 inches -
Fastener Length
Between 2.431 inches and 2.451 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Width Between Flats
Between 0.448 inches and 0.455 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.313 inches first hole and 2.343 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4634 MPN BACB30LU4-16Close Tolerance Screw
- 5305-01-203-3201 MPN BACS12CK3U8Machine Screw
- 5305-01-203-6447 MPN 3M927-4L6Close Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5305-01-512-8368 MPN 3M1170C4-4AClose Tolerance Screw
- 5306-00-074-2701 MPN VFK100G-05012Shear Bolt
- 5306-00-503-5701 MPN VAL23602-7D016Close Tolerance Bolt
- 5306-00-538-7814 MPN 3M261-3-6Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-136-7441 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M744-4D34 | Boeing Company, The |
ST3M744-4D34 | Arconic Global Fasteners & Rings, |
VS3174-4D34 | Arconic Global Fasteners & Rings, |
ST3M744-4D34 | Heartland Precision Fasteners, Inc. |
ST3M744-4D34 | Fastener Innovation Technology, Inc. |
VCG0001-4D34 | Valley-todeco, Inc. |
AIC687-4D34 | Sps Technologies, Llc |
PBF1265-4D34 | Sps Technologies, Llc |
122895-4D34 | Sps Technologies, Llc |
122895-4D34 | Sps Technologies Inc |
S406-4D34 | Huck Intl Inc |
ST3M744-4D34 | Alcoa Global Fasteners, Inc. |
S406-4D34 | Huck International, Inc. |
VS3174-4D34 | Alcoa Global Fasteners, Inc. |
MB154-4D34 | Hi-shear Corporation |
10115957 | Nimikkeistokeskus Ncb Finland |
GS1015-4D34 | B & B Specialties Inc. |