NSN 5306-01-136-8613
Close Tolerance Hex Head Bolt
Between 1.681 inches and 1.701 inches fastener length, spline drive shear head head style, 0.164 inches head height, width between flats: between 0.448 inches and 0.455 inches .
Manufacturer part number PBF1265-4D22 for national stock number 5306011368613.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-136-8613.
-
MPN or Model
PBF1265-4D22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.336 inches -
Fastener Length
Between 1.681 inches and 1.701 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Width Between Flats
Between 0.448 inches and 0.455 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.563 inches first hole and 1.593 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-8140 MPN ST3M455-3L3-1Close Tolerance Screw
- 5305-01-234-1661 MPN BACB30LU04-4Close Tolerance Screw
- 5305-01-349-4199 MPN VCL0009-8-86Close Tolerance Screw
- 5305-01-412-7538 MPN VCL0009-4-18Close Tolerance Screw
- 5305-01-418-9857 MPN 3M1170D3-2AFClose Tolerance Screw
- 5306-00-223-3138 MPN 2-141-249-03Turbine Vane Bolt
- 5306-00-528-6639 MPN J644P09DMachine Bolt
- 5306-00-567-8373 MPN BACB30LM4H21Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-136-8613 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1265-4D22 | Sps Technologies, Llc |
ST3M744-4D22 | Boeing Company, The |
VCG0001-4D22 | Valley-todeco, Inc. |
AIC687-4D22 | Sps Technologies, Llc |
MB154-4D22 | Hi-shear Corporation |
122895-4D22 | Sps Technologies, Llc |
S406-4D22 | Huck International, Inc. |
STM3744-4D22 | Fairchild Holding Corp |
STM377-4D22 | Fairchild Holding Corp |
VS3174-4D22 | Fairchild Holding Corp |
MB154-4D22 | Lisi Aerospace Canada Corp |
S406-4D22 | Huck Intl Inc |
ST3M744-4D22 | Alcoa Global Fasteners, Inc. |
VS3174-4D22 | Alcoa Global Fasteners, Inc. |
10115961 | Nimikkeistokeskus Ncb Finland |
GS1015-4D22 | B & B Specialties Inc. |