NSN 5306-01-152-4024
Wheel Bolt
Between 1.115 inches and 1.135 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9491-14 for national stock number 5306011524024.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-152-4024.
-
MPN or Model
MS9491-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.760 inches and 0.850 inches -
Fastener Length
Between 1.115 inches and 1.135 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.190 inches and 0.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-064-8687 MPN MS3106R20-3SCElectrical Plug Connector
- 5940-00-082-4642 MPN MS18029-15-15Terminal Board Cover
- 5940-00-115-5026 MPN MS20659-137Lug Terminal
- 5905-00-141-0723 MPN RCR20G621JPComposition Fixed Resistor
- 5935-00-177-2019 MPN MS3106E20-3SCElectrical Plug Connector
- 5905-00-195-5534 MPN MS90194-57Composition Fixed Resistor
- 5935-00-201-7510 MPN MS3102R24-20SCElectrical Receptacle Connector
- 5905-00-251-7749 MPN MS35044-212Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-152-4024 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9491-14 | Military Standards |
Stock Check
- NE: 417
- NS: 13