NSN 5306-01-163-0588
Close Tolerance Hex Head Bolt
Between 1.312 inches and 1.332 inches fastener length, spline drive shear head head style, between 0.271 inches and 0.291 inches head height, grip diameter: between 0.4990 inches and 0.4995 inches .
Manufacturer part number S406-8-12 for national stock number 5306011630588.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-163-0588.
-
MPN or Model
S406-8-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.552 inches and 0.592 inches -
Fastener Length
Between 1.312 inches and 1.332 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.271 inches and 0.291 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Head Minor Diameter
Between 0.774 inches and 0.782 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-351-3522 MPN VCL0010-4-9Close Tolerance Screw
- 5305-01-462-2729 MPN 3M1169V4-6AClose Tolerance Screw
- 5306-00-195-2299 MPN VFK100G-08020Shear Bolt
- 5306-01-012-0622 MPN STSBG002A04U017Shear Bolt
- 5306-01-027-1995 MPN VAL23033-3-9Close Tolerance Bolt
- 5306-01-027-1997 MPN VEH160271-4M18Close Tolerance Bolt
- 5306-01-193-6830 MPN VFK600-7H17Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-163-0588 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S406-8-12 | Huck International, Inc. |
VS3174-8-12 | Arconic Global Fasteners & Rings, |
VCG0001-8-12 | Valley-todeco, Inc. |
AIC687-8-12 | Sps Technologies, Llc |
PBF1265-8-12 | Sps Technologies, Llc |
MB154-8-12 | Hi-shear Corporation |
122895-8-12 | Sps Technologies, Llc |
ST3M744-8-12 | Boeing Company, The |
MB154-8-12 | Lisi Aerospace Canada Corp |
11823-8-12 | Reid Products Inc. |
S406-8-12 | Huck Intl Inc |
10116039 | Nimikkeistokeskus Ncb Finland |
VS3174-8-12 | Alcoa Global Fasteners, Inc. |