NSN 5306-01-164-4459
Close Tolerance Hex Head Bolt
Between 3.443 inches and 3.463 inches fastener length, spline drive shear head head style, 0.210 inches head height, width between flats: between 0.578 inches and 0.585 inches .
Manufacturer part number VCG0001-6D33 for national stock number 5306011644459.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-164-4459.
-
MPN or Model
VCG0001-6D33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
Between 3.443 inches and 3.463 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Width Between Flats
Between 0.578 inches and 0.585 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 3.052 inches and 3.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.325 inches first hole and 3.355 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-106-3860 MPN 3M926-5L10Close Tolerance Screw
- 5305-01-512-8299 MPN 3M1170D6-18AClose Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
- 5305-01-604-9086 MPN 3M1277E8D28AMachine Screw
- 5306-00-001-4699 MPN GB511H-4-14Shear Bolt
- 5306-00-062-6054 MPN 3M33-5D9Machine Bolt
- 5306-00-723-9470 MPN VAL21013-12096Shear Bolt
- 5306-00-782-8235 MPN BACB30GT8-42Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-164-4459 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0001-6D33 | Valley-todeco, Inc. |
AIC687-6D33 | Sps Technologies, Llc |
VS3174-6D33 | Arconic Global Fasteners & Rings, |
S406-6D33 | Huck International, Inc. |
PBF1265-6D33 | Sps Technologies, Llc |
ST3M744-6D33 | Boeing Company, The |
MB154-6D33 | Hi-shear Corporation |
122895-6D33 | Sps Technologies, Llc |
MB154-6D33 | Lisi Aerospace Canada Corp |
11823-6D33 | Reid Products Inc. |
S406-6D33 | Huck Intl Inc |
VS3174-6D33 | Alcoa Global Fasteners, Inc. |
VCG0001-6D33 | Valley-todeco, Inc. |
AIC687-6D33 | Sps Technologies, Llc |
VS3174-6D33 | Alcoa Global Fasteners, Inc. |