NSN 5306-01-006-8982
Coaxial Connector
Between 7.632 inches and 7.679 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number BM17020-7-100A for national stock number 5306010068982.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-006-8982.
-
MPN or Model
BM17020-7-100A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.372 inches and 1.439 inches -
Fastener Length
Between 7.632 inches and 7.679 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 6.240 inches and 6.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response or mil-c-8837 ty2, cl 2 military specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
08524-b-17020 manufacturers standard
More from these suppliers
- 5305-01-435-3891 MPN BACB30LU7-43Close Tolerance Screw
- 5305-01-435-9139 MPN BACB30LH3-12Close Tolerance Screw
- 5306-00-059-1209 MPN 3M33-5-39AClose Tolerance Bolt
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
- 5306-01-206-5179 MPN ST3M753-6H17Shear Bolt
- 5306-01-209-9296 MPN VAL23033-8H24XShoulder Bolt
- 5306-01-319-9438 MPN VAL23009-SD11Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-006-8982 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17020-7-100A | Huck International, Inc. |
VS3071-7F100 | Arconic Global Fasteners & Rings, |
VEPS132121-7F100 | Valley-todeco, Inc. |
EWSB22D7A100 | Sps Technologies, Llc |
GB511B7-100 | Northrop Grumman Systems Corporation |
BM17020-7-100A | Huck Intl Inc |
VS3071-7F100 | Alcoa Global Fasteners, Inc. |
EWSB22D7A100 | Sps Technologies, Llc |