NSN 5306-01-164-4461
Close Tolerance Hex Head Bolt
Between 1.047 inches and 1.094 inches fastener length, spline drive shear head head style, between 0.177 inches and 0.197 inches head height, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number VCG0002-5-11 for national stock number 5306011644461.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-164-4461.
-
MPN or Model
VCG0002-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.416 inches -
Fastener Length
Between 1.047 inches and 1.094 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.177 inches and 0.197 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-338-9348 MPN BACB30NN4S17Close Tolerance Screw
- 5305-01-349-4192 MPN VCL0009-5-23Close Tolerance Screw
- 5305-01-350-4207 MPN VCL0009-3D4Close Tolerance Screw
- 5305-01-399-6096 MPN 3M927-3L19Close Tolerance Screw
- 5305-01-435-5371 MPN BACB30LU8-20Close Tolerance Screw
- 5305-01-466-0001 MPN VCL009-4-9Close Tolerance Screw
- 5305-01-476-9194 MPN 3M1170D4-9AClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-164-4461 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0002-5-11 | Valley-todeco, Inc. |
AIC688-5-11 | Sps Technologies, Llc |
PBF 1266-5-11 | Sps Technologies, Llc |
122896-5-11 | Sps Technologies, Llc |
MB155-5-11 | Hi-shear Corporation |
ST3M747-5-11 | Boeing Company, The |
VS3191-5-11 | Arconic Global Fasteners & Rings, |
S397-5-11 | Huck International, Inc. |
ST3M747-5-11 | Sps Technologies, Llc |
MB155-5-11 | Lisi Aerospace Canada Corp |
S397-5-11 | Huck Intl Inc |
10116044 | Nimikkeistokeskus Ncb Finland |
VCG002-5-11 | Valley-todeco, Inc. |
VS3191-5-11 | Alcoa Global Fasteners, Inc. |
GS1031-5-11 | B & B Specialties Inc. |