NSN 5306-01-165-2441
Coaxial Connector
Between 1.473 inches and 1.503 inches fastener length, spline extended washer head style, between 0.247 inches and 0.287 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number VS3190-5-15 for national stock number 5306011652441.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-165-2441.
-
MPN or Model
VS3190-5-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.526 inches and 0.576 inches -
Fastener Length
Between 1.473 inches and 1.503 inches -
Head Style
Spline extended washer -
Head Height
Between 0.247 inches and 0.287 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.927 inches and 0.947 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-01-076-3168 MPN ST3M729-10D55Close Tolerance Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-349-9558 MPN VCC0090-6-13Shear Bolt
- 5306-01-350-8233 MPN VCJ0001-9D26Close Tolerance Bolt
- 5306-01-398-1334 MPN VAL22034-5G15Shear Bolt
- 5306-01-463-3336 MPN VCJ0001-10D23Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-165-2441 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3190-5-15 | Arconic Global Fasteners & Rings, |
S343-5-15 | Huck International, Inc. |
VFK600-5-15 | Valley-todeco, Inc. |
AIC763-5-15 | Sps Technologies, Llc |
PBF1267-5-15 | Sps Technologies, Llc |
MB156-5-15 | Hi-shear Corporation |
122897-5-15 | Sps Technologies, Llc |
ST3M753-5-15 | Heartland Precision Fasteners, Inc. |
ST3M753-5-15 | B & B Specialties Inc. |
ST3M753-5-15 | Houston Precision Fasteners I, Lp |
ST3M753-5-15 | Space-lok, Inc. |
ST3M753-5-15 | Fastener Innovation Technology, Inc. |
MB156-5-15 | Lisi Aerospace Canada Corp |
ST3M753-5-15 | Boeing Company, The |
S343-5-15 | Huck Intl Inc |
10116047 | Nimikkeistokeskus Ncb Finland |
VS3190-5-15 | Alcoa Global Fasteners, Inc. |
GS1032-5-15 | B & B Specialties Inc. |