NSN 5306-01-165-3311
Close Tolerance Hex Head Bolt
Between 1.565 inches and 1.612 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number S397-3D20 for national stock number 5306011653311.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-165-3311.
-
MPN or Model
S397-3D20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.305 inches and 0.372 inches -
Fastener Length
Between 1.565 inches and 1.612 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.444 inches first hole and 1.501 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-249-0460 MPN GB510FG3-2Close Tolerance Screw
- 5305-01-417-2492 MPN 3M1169V3-6AClose Tolerance Screw
- 5305-01-462-2828 MPN 3M1169V3-7AClose Tolerance Screw
- 5305-01-528-6710 MPN 3M1170C3-19AClose Tolerance Screw
- 5305-01-600-8422 MPN PMT1124-12Close Tolerance Screw
- 5306-00-508-6903 MPN VAL23611-12DS36Close Tolerance Bolt
- 5306-00-883-9244 MPN VFK100G-06036Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-165-3311 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S397-3D20 | Huck International, Inc. |
VS3191-3D20 | Arconic Global Fasteners & Rings, |
VCG0002-3D20 | Valley-todeco, Inc. |
AIC688-3D20 | Sps Technologies, Llc |
PBF1266-3D20 | Sps Technologies, Llc |
MB155-3D20 | Hi-shear Corporation |
122896-3D20 | Sps Technologies, Llc |
ST3M747-3D20 | Boeing Company, The |
MB155-3D20 | Lisi Aerospace Canada Corp |
ST3M747-3D20 | Alcoa Global Fasteners, Inc. |
S397-3D20 | Huck Intl Inc |
VS3191-3D20 | Alcoa Global Fasteners, Inc. |
GS1031-3D20 | B & B Specialties Inc. |