NSN 5306-01-043-5733
Close Tolerance Hex Head Bolt
Between 4.874 inches and 4.904 inches fastener length, undercut hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4D72 for national stock number 5306010435733.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-043-5733.
-
MPN or Model
BACB30NF4D72
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 4.874 inches and 4.904 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.086 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 4.490 inches and 4.510 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.748 inches first hole and 4.798 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30nf manufacturers standard
More from these suppliers
- 5305-00-501-9861 MPN LS15266V3-2Close Tolerance Screw
- 5305-01-190-5779 MPN LD111-0044-2308Close Tolerance Screw
- 5305-01-240-5184 MPN 3M925C3-19AClose Tolerance Screw
- 5305-01-309-7039 MPN 74A731255-2001Socket Head Cap Screw
- 5305-01-338-0432 MPN BACB30NT3R13Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-477-5959 MPN 3M1170V4-6AClose Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-043-5733 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4D72 | The Boeing Company |
BACB30NF4D72 | Sps Technologies, Llc |
BACB30NF4D72 | Valley-todeco, Inc. |
BACB30NF4D72 | Arconic Global Fasteners & Rings, |
BACB30NF4D72 | Federal Manufacturing Corporation |
BACB30NF4D72 | Sps Technologies, Llc |
BACB30NF4D72 | Sps Technologies, Llc |