NSN 5306-01-188-3997
Coaxial Connector
1.930 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.940 inches .
Manufacturer part number 75B120053-2001 for national stock number 5306011883997.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-188-3997.
-
MPN or Model
75B120053-2001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.055 inches -
Fastener Length
1.930 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.940 inches -
Grip Diameter
Between 0.7485 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-001-1496 MPN 5M608-18Grounding Metallic Shielded Cable Ferrule
- 1560-00-001-9127 MPN 53-310175-5Gun Seal Ring Assembly
- 1560-00-106-0508 MPN 32-05339-1327Aircraft Stringer
- 1560-00-137-7604 MPN 32-21179-8Bayonet Fitting
- 1560-00-138-7870 MPN 32-12003-56Structural Angle Clip
- 5930-00-333-1177 MPN ST5M1394-002ASensitive Switch
- 1560-00-361-7259 MPN 68A113027-2019Wing Section Hinge
- 1560-00-477-1530 MPN 32-31153-7Lower Nacelle Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-188-3997 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
75B120053-2001 | Boeing Company, The |