NSN 5305-00-040-9438
High Torque Screw
Between 1.701 inches and 1.748 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number BM19019-5D20 for national stock number 5305000409438.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-040-9438.
-
MPN or Model
BM19019-5D20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.701 inches and 1.748 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.634 inches first hole -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-281-8118 MPN HT8140-4-7Close Tolerance Screw
- 5305-00-354-5143 MPN HT4024L4-4Close Tolerance Screw
- 5305-00-505-2892 MPN LS15265V3-6Close Tolerance Screw
- 5305-00-595-5978 MPN HT4017-08-4Close Tolerance Screw
- 5305-00-916-6689 MPN 51B333-10Machine Screw
- 5305-01-111-4201 MPN BACB30LU3P2Close Tolerance Screw
- 5305-01-158-5373 MPN SC2163-5-6Machine Screw
- 5305-01-211-7485 MPN SC1786R-3-02Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-040-9438 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19019-5D20 | Huck International, Inc. |
HT4025L5D20 | Huck International, Inc. |
HT4025L5D20 | Arconic Global Fasteners & Rings, |
HT8140-5D20 | Arconic Global Fasteners & Rings, |
ST3M454-5DL20 | Boeing Company, The |
HT4025L5D20 | Hi-shear Corporation |
HT4025L5D20 | Lisi Aerospace Canada Corp |
HT4025L5D20 | Alcoa Fastening Systems |
11905-5D20 | Reid Products Inc. |
HT4025L5D20 | Sps Technologies, Llc |
HT4025L5D20 | Sps Technologies Ltd Tj Brooks |
ST3M454-5D20 | Boeing Company, The |
106830-5D20 | Sps Technologies Inc |
HT4025L5D20 | Sps Technologies Inc |
BM19019-5D20 | Huck Intl Inc |
HT4025L5D20 | Huck Intl Inc |
HT295-5D20 | Hi-shear Corporation |
HT8140-5D20 | Alcoa Global Fasteners, Inc. |
106830-5D20 | Sps Technologies, Llc |
HT4025L5D20 | Sps Technologies, Llc |
HT4025L5D20 | Alcoa Global Fasteners, Inc. |