NSN 5306-01-189-0025
Coaxial Connector
Between 3.212 inches and 3.242 inches fastener length, spline extended washer head style, 0.236 inches head height, width between flats: 0.561 inches .
Manufacturer part number 76754-7-41 for national stock number 5306011890025.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-189-0025.
-
MPN or Model
76754-7-41
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.665 inches -
Fastener Length
Between 3.212 inches and 3.242 inches -
Head Style
Spline extended washer -
Head Height
0.236 inches -
Width Between Flats
0.561 inches -
Extended Washer Diameter
0.745 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.437 inches -
Grip Length
2.562 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-i-6868 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-9359 MPN 4-40NC2AX3-16SKSetscrew
- 5305-00-143-9570 MPN PSVT CRES.086-5Socket Head Cap Screw
- 5305-00-310-5251 MPN 73573-96-13Socket Head Cap Screw
- 5305-00-590-7732 MPN 20097L94C12Socket Head Cap Screw
- 5305-01-008-2892 MPN 67077D4-9Close Tolerance Screw
- 5305-01-017-4900 MPN 38030L8C36Socket Head Cap Screw
- 5305-01-023-2976 MPN 20098H94C6Socket Head Cap Screw
- 5305-01-043-8057 MPN 67077-3-9Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-189-0025 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
76754-7-41 | Sps Technologies, Llc |
76754-7-41 | Sps Technologies, Llc |