NSN 5305-00-143-1864
High Torque Screw
Between 1.812 inches and 1.859 inches fastener length, flat countersunk head style, between 0.634 inches and 0.668 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 106334-7-22 for national stock number 5305001431864.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1864.
-
MPN or Model
106334-7-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.427 inches and 0.494 inches -
Fastener Length
Between 1.812 inches and 1.859 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.634 inches and 0.668 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 101.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 762 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-062-8457 MPN NAS1102-02-8Machine Screw
- 5305-00-132-1746 MPN NAS1189-3P10Socket Head Cap Screw
- 5305-00-660-3149 MPN NAS1203-12Close Tolerance Screw
- 5305-00-905-5568 MPN 3006T69P01Socket Head Cap Screw
- 5305-00-915-4762 MPN 64228V3-6Machine Screw
- 5305-00-915-4767 MPN C792-4-3Machine Screw
- 5305-00-919-5108 MPN NAS1164-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1864 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-7-22 | Sps Technologies, Llc |
202-15522-7-22 | Triumph Aerostructures, Llc |
106334-7-22 | Sps Technologies, Llc |